Cisco WAP131 Dual-Band Wireless Access Point

New

Cisco WAP131 Simultaneous Dual-Band WiFi PoE Access Point (600Mbps N)

More details

More info

Specifications Description

Standards

  • IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

Cabling type

  • Category 5e or better

Antennas

  • Internal antennas optimized for desktop installation with vertical orientation

LED indicators

  • Power, WLAN, LAN

Operating system

  • Linux

Physical Interfaces

Ports

  • 10/100/1000 Ethernet, with support for 802.3af/at PoE, Power Port for AC adapter

Power Supply

  • External 12V 1.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE

Buttons

  • Reset button, Power (on/off), Push button

Lock slot

  • Slot for Kensington lock

LEDs

  • Power, Wireless, Ethernet

Physical Specifications

Physical dimensions (W x D x H)

  • 6.693 x 6.693x 1.413 in. (170 x 170 x 35.9 mm)

Weight

  • 0.89 lb (0.40kg)

Network Capabilities

VLAN support

  • Yes

Number of VLANs

  • 1 management VLAN plus 8 VLANs for SSIDs

802.1X supplicant

  • Yes

SSID-to-VLAN mapping

  • Yes

Auto channel selection

  • Yes

Spanning tree

  • Yes

Load balancing

  • Yes

IPv6

  • Yes
    • IPv6 host support
    • IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.

Layer 2

  • 802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN

Security

WPA and WPA2

  • Yes, including Enterprise authentication

Access control

  • Yes, management access control list (ACL) plus MAC ACL

Secure management

  • HTTPS

SSID broadcast

  • Yes

Rogue-access-point detection

  • No

Mounting and Physical Security

Mounting options

  • Desktop only

Physical security lock

  • Kensington lock slot

Quality of Service

Quality of service (QoS)

  • Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Performance

Wireless throughput

  • Up to 300-Mbps data rate (real-world throughput will vary)

Recommended user support

  • Up to 32 connective users, 16 active users per radio

Configuration

Web user interface

  • Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management

Management protocols

  • Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour

Remote management

  • Yes

Event logging

  • Local, remote syslog, email alerts

Network diagnostics

  • Logging and packet capture

Web firmware upgrade

  • Firmware upgradable through web browser, imported/exported configuration file

Dynamic Host Configuration Protocol (DHCP)

  • DHCP client

IPv6 host

  • Yes

HTTP redirect

  • No

Wireless

Frequency

  • Dual concurrent radios (2.4 and 5 GHz)

Radio and modulation type

  • Dual radio, orthogonal frequency division multiplexing (OFDM)

WLAN

  • 802.11n
  • 2x2 multiple-input multiple-output (MIMO) with 2 spatial streams
  • 20, and 40 MHz for 802.11n
  • PHY data rate up to 600 Mbps

Data rates supported

  • 802.11a/b/g:
    • 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
    • 802.11n: 6.5 to 300 Mbps
      • 20-MHz bandwidth: MCS 0-15 for supported data rates
      • 40-MHz bandwidth: MCS 0-15 for supported data rates

Frequency Band and 20-MHz Operating Channels

  • A Regulatory Domain:
    • 2.412 to 2.462 GHz; 11 channels
    • 5.180 to 5.240 GHz; 4 channels
    • 5.745 to 5.825 GHz; 5 channels
  • E Regulatory Domain:
    • 2.412 to 2.472 GHz; 13 channels
    • 5.180 to 5.240 GHz; 4 channels
  • C Regulatory Domain:
    • 2.412 to 2.462 GHz; 11 channels
    • 5.745 to 5.805 GHz; 4 channels

Maximum Number of Nonoverlapping Channels

  • 2.4 GHz
    • 802.11b/g
      • 20 MHz: 3
    • 802.11n
      • 20 MHz: 3
  • 5 GHz
    • 802.11a
      • 20 MHz: 9
    • 802.11n
      • 20 MHz: 9
      • 40 MHz: 4

Wireless isolation

  • Wireless isolation between clients

External antennas

  • None

Internal antennas

  • Internal Fixed PiFA Antenna

Antenna gain in dBi

  • Maximum antenna gain of 3.4 dBi on 2.4 GHz
  • Maximum antenna gain of 4.5 dBi on 5 GHz

Wireless distribution system (WDS)

  • Yes

802.11i

  • Yes

Multiple SSIDs

  • 8

Wireless VLAN map

  • Yes

WLAN security

  • Yes

Wi-Fi Multimedia (WMM)

  • Yes, with unscheduled automatic power save

Operating Modes

Access point

  • Access Point mode, WDS Bridging, Workgroup Bridge mode

Environmental

Power options

  • IEEE 802.3af/at Ethernet switch
  • Cisco Power Injector - SB-PWR-INJ2-xx
  • AC Adapter - included 12v1.5A
  • PoE Peak power: 7.42W

Compliance

  • Safety:
    • UL 60950-1
    • CAN/CSA-C22.2 No. 60950-1
    • IEC 60950-1
    • EN 60950-1
  • Radio approvals:
    • FCC Part 15.247, 15.407
    • RSS-210 (Canada)
    • EN 300.328, EN 301.893 (Europe)
    • AS/NZS 4268.2003 (Australia and New Zealand)
  • EMI and susceptibility (Class B):
    • FCC Part 15.107 and 15.109
    • ICES-003 (Canada)
    • EN 301.489-1 and -17 (Europe)

Operating temperature

  • 0° to 40°C (32° to 104°F)

Storage temperature

  • -20° to 70°C (-4° to 158°F)

Operating humidity

  • 10% to 85% noncondensing

Storage humidity

  • 5% to 90% noncondensing

System memory

  • 128-MB RAM
  • 128-MB Flash

Package Contents

  • Cisco WAP131 Wireless-N Dual Radio Access Point x1
  • AC Power Adapter x1
  • User guide on CD-ROM x1
  • Quick-start guide x1
  • Ethernet network cable x1

Minimum Requirements

  • Switch or router with PoE support, PoE injector, or AC Power Adapter
  • Web-based configuration: Java-enabled web browser

Warranty

  • Limited lifetime